Brother DCP-J562DW Online User's Manual page 216

a. Select [Page Layout]. Press OK.
b. Select [2in1(ID)]. Press OK.
5. Press Mono Start or Colour Start.
The machine starts scanning one side of the identification card.
6. After the machine has scanned the first side, turn over the identification card and press 1.
DCP-J562DW/MFC-J680DW/MFC-J880DW
1. Place your identification card face down near the upper-left corner of the scanner glass.
a
a
d
b
a. 3 mm or greater (top, left)
b. 207 mm
c. 145 mm
d. scannable area
2. Press
[Copy].
3. Enter the number of copies in one of the following ways:
• Press [-] or [+] on the Touchscreen.
• Press to display the keyboard on the Touchscreen, and then enter the number of copies using the
Touchscreen keyboard. Press [OK].
4. Press [Options] > [Page Layout] > [2in1(ID)].
5. Read and confirm the displayed list of settings you have selected. When you have finished changing settings,
press [OK].
6. Press [Mono Start] or [Colour Start].
The machine starts scanning one side of the identification card.
7. After the machine has scanned the first side, turn over the identification card and press [Continue] to scan
the other side.
Related Information
• Copy
c
210