Reset The Network Settings To Factory Default - Brother DCP-J562DW Online User's Manual

Home > Network > Technical Information for Advanced Users
Default

Reset the Network Settings to Factory Default

You can use your machine's control panel to reset the print server to its default factory settings. This resets all
information, such as the password and IP address.
IMPORTANT
(MFC-J480DW/MFC-J680DW)
When you reset the machine, your faxes that are stored in the machine's memory may be deleted. Before
you reset the machine, you can transfer your faxes to your computer or another fax machine so you will not
lose any important messages.
• This feature restores all wired (supported models only) and wireless network settings to the factory
settings.
• You can also reset the print server to its factory default settings using BRAdmin Light or BRAdmin
Professional 3.
>> MFC-J480DW
>> DCP-J562DW/MFC-J680DW/MFC-J880DW
MFC-J480DW
1. Press Settings.
2. Press a or b to select the following:
a. Select [Network]. Press OK.
b. Select [Network Reset]. Press OK.
3. Press 1 or a for Reset.
4. Press 1 or a for Reboot.
The machine will restart.
DCP-J562DW/MFC-J680DW/MFC-J880DW
1. Press [Settings] > [All Settings] > [Network] > [Network Reset].
2. [Reset Network?] will be displayed. Press [Yes].
3. [Reboot OK?] will be displayed. Press [Yes] for two seconds to confirm.
The machine will restart.
Related Information
• Technical Information for Advanced Users
• Transfer Your Faxes or Fax Journal Report
> Reset the Network Settings to Factory
397