Brother DCP-J562DW Online User's Manual page 395

Hide thumbs Also See for DCP-J562DW:
Table of Contents

Advertisement

Home >
Network
>
Additional Methods of Configuring Your Brother Machine for a Wireless Network
®
Wi-Fi Direct
>
Configure Your Wi-Fi Direct Network
Method
Configure Your Wi-Fi Direct Network Using the PIN Method
>> MFC-J480DW
>> DCP-J562DW/MFC-J680DW/MFC-J880DW
MFC-J480DW
If your mobile device supports the PIN Method of Wi-Fi Direct, follow these steps to configure a Wi-Fi Direct
network:
When the machine receives the Wi-Fi Direct request from your mobile device, the message [Wi-Fi
Direct connection request received.] will appear on the LCD. Press OK to connect.
1. Press Settings.
2. Press a or b to select the following:
a. Select [Network]. Press OK.
b. Select [Wi-Fi Direct]. Press OK.
c. Select [PIN Code]. Press OK.
3. When [Wi-Fi Direct On? Yes ⇒ Press 1 No ⇒ Press 2] appears, press 1 to accept. To cancel,
press 2.
4. Activate your mobile device's WPS PIN configuration method (see your mobile device's user's guide for
instructions) when [Activate Wi-Fi Direct on other device. Then press OK.] appears. Press
OK on your Brother machine. This will start the Wi-Fi Direct setup.
5. Do one of the following:
When your Brother machine is the G/O (Group Owner), it will wait for a connection request from your
mobile device. When [PIN Code] appears, enter the PIN displayed on your mobile device in the
machine. Press OK. Follow the instructions and go to next step. If the PIN is displayed on your Brother
machine, enter the PIN in your mobile device.
When your Brother machine is not the G/O (Group Owner), it will display available device names with
which to configure a Wi-Fi Direct network. Select the mobile device to which you want to connect and
press OK. Search for available devices again by selecting [Rescan].
When [Select PIN Method Display PIN ⇒ Press1 Input PIN ⇒ Press2] appears, do one
of the following:
Press 1 to display the PIN on your machine and enter the PIN in your mobile device. Follow the
instructions, and then go to next step.
Press 2 to enter a PIN shown on your mobile device in the machine, and then press OK. Follow the
instructions, and then go to next step.
6. If your mobile device connects successfully, the machine displays [Connected]. You have completed the
Wi-Fi Direct network setup. For more information on printing from or scanning to your mobile device,
download the Mobile Print/Scan Guide for Brother iPrint&Scan or the AirPrint Guide from your model's
Manuals page on the Brother Solutions Center at http://support.brother.com.
DCP-J562DW/MFC-J680DW/MFC-J880DW
If your mobile device supports the PIN Method of Wi-Fi Direct, follow these steps to configure a Wi-Fi Direct
network:
When the machine receives the Wi-Fi Direct request from your mobile device, the message [Wi-Fi
Direct connection request received. Press [OK] to connect.] will appear on the LCD.
Press [OK] to connect.
> Configure Your Wi-Fi Direct Network Using the PIN
>
Use
389

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfc-j480dwMfc-j680dwMfc-j880dw

Table of Contents