Brother DCP-J562DW Online User's Manual page 385

Hide thumbs Also See for DCP-J562DW:
Table of Contents

Advertisement

8. Do one of the following:
If you selected the [Open System] option, press a or b to select the Encryption type [None] or [WEP],
and then press OK.
If you selected the [WEP] option for Encryption type, enter the WEP key, and then press OK.
If you selected the [Shared Key] option, enter the WEP key, and then press OK.
If you selected the [WPA/WPA2-PSK] option, press a or b to select the Encryption type [TKIP+AES] or
[AES], and then press OK.
Enter the WPA key, and then press OK.
For more information about how to enter text, see the Appendix.
Your Brother machine supports the use of the first WEP key only.
9. To apply the settings, press 1 to select [Yes]. To cancel, press 2.
10. The machine will attempt to connect to the wireless device you have selected.
If your wireless device is connected successfully, the machine's LCD displays [Connected].
®
For Windows
:
You have completed the wireless network setup. Use the Brother Installation CD-ROM to install drivers and
software necessary for operating your device.
For Macintosh:
You have completed the wireless network setup. Go to your model's Downloads page on the Brother Solutions
Center at
http://support.brother.com
DCP-J562DW/MFC-J680DW/MFC-J880DW
Before configuring your machine, we recommend writing down your wireless network settings. You will need this
information before you continue with the configuration.
1. Check and record the current wireless network settings.
Network Name (SSID)
Communication Mode
Infrastructure
For example:
Network Name (SSID)
HELLO
Communication Mode
Infrastructure
If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother machine
supports the use of the first WEP key only.
2. Press
[Settings] > [All Settings] > [Network] > [WLAN] > [Setup Wizard].
to install drivers and software necessary for operating your device.
Authentication Method
Open System
Shared Key
WPA/WPA2-PSK
Authentication Method
WPA2-PSK
Encryption Mode
NONE
WEP
WEP
AES
TKIP
(TKIP is supported for
WPA-PSK only.)
Encryption Mode
AES
Network Key
-
Network Key
12345678
379

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfc-j480dwMfc-j680dwMfc-j880dw

Table of Contents