Brother DCP-J562DW Online User's Manual page 122

7. Press a or b to select the [Set at Device] option, and then press OK.
8. Select the scan settings you want to change, and then press OK.
Option Description
Select the scan type for your document.
Scan Type
Resolution Select the scan resolution for your document.
Select the file format for your document.
File Type
Select the scan size for your document.
Scan Size
9. Press Mono Start or Colour Start.
[Scan Type] depends on the settings you have selected. Pressing Mono Start or Colour Start does not
allow you to change the settings.
MFC-J680DW/MFC-J880DW
1. Load your document.
2. Press [Scan] > [to OCR].
3. If the machine is connected over the network, press a or b to display the computer where you want to send
data, and then press the computer name.
If the LCD prompts you to enter a PIN, use the LCD to enter the four-digit PIN for the computer, and then
press [OK].
4. Do one of the following:
• To change the settings, press [Options], and then go to the next step.
• Press [Start] to start scanning without changing additional settings.
The machine starts scanning. If you are using the machine's scanner glass, follow the LCD instructions to
complete the scanning job.
5. Press the [Scan Settings] option, and then press [Set at Device].
To use the [Scan Settings] option, a computer with the ControlCenter software installed must be
connected to the machine.
6. Select the scan settings you want to change, and then press [OK].
Option Description
Select the scan type for your document.
Scan Type
Resolution Select the scan resolution for your document.
Select the file format for your document.
File Type
Select the scan size for your document.
Scan Size
7. Press [Start].
The machine starts scanning. If you are using the machine's scanner glass, follow the LCD instructions to
complete the scanning job.
Related Information
• Scan Using the Scan Button on Your Brother Machine
116