Brother DCP-J562DW Online User's Manual page 576

Level 1
Wi-Fi Direct
NFC
(MFC-J880DW)
New Function
Notice
Web Connect
Settings
Network I/F
(MFC-J880DW)
WLAN Enable
(DCP-J562DW/
MFC-J680DW)
Network Reset
[Settings] > [All Settings] > [Print Reports]
Level 1
XMIT Verify
(MFC models)
Address Book
(MFC models)
Fax Journal
(MFC models)
User Settings
Network Configuration Print a list of your Network settings.
WLAN Report
Caller ID history
(MFC models)
[Settings] > [All Settings] > [Machine Info.]
Level 1
Serial No.
Level 2 Level 3
Device
Information
IP Address
Status Status
Information
Signal
I/F Enable -
- -
New Function -
Notice
Status -
Proxy Settings Proxy Connection Change the Web connection settings.
Address
Port
User Name
Password
- -
- -
- -
Descriptions
Print a Transmission Verification Report for your last transmission.
Print a list of names and numbers stored in the Address Book.
Print a list of information about your last 200 incoming and outgoing faxes.
(TX means Transmit. RX means Receive.)
Print a list of your settings.
Print the wireless LAN connection results.
Print a list of the available Caller ID information about the last 30 received faxes and
telephone calls.
Level 2 Descriptions
- Check your machine's serial number.
Descriptions
When the machine is not connected, the LCD
displays Not Connected.
View your machine's current IP Address.
View the current Wi-Fi Direct network status.
View the current Wi-Fi Direct network signal
strength.
When your machine acts as Group Owner, the
LCD always indicate a strong signal.
Turn the Wi-Fi Direct connection on or off.
Turn the NFC function on or off.
View the latest information about cloud
services on the Home screen via the Internet.
Receive status notifications about available
web services.
Select the network connection type.
Turn wireless network connection On or Off.
Restore all network settings back to the
factory settings.
570