Not Registered - Brother MFC-J825DW Basic User's Manual

Error Message
No Paper Fed
No Response/Busy

Not Registered

Out of Fax Memory
72
Cause
The Photo Bypass Tray is in the Photo
printing position.
The machine is out of paper or paper
is not properly loaded in the paper
tray.
The paper is jammed in the machine.
Paper dust has accumulated on the
surface of the paper pick-up rollers.
The Jam Clear Cover is not closed
properly.
The number you dialed does not
answer or is busy.
You tried to access a Speed Dial
number that is not programmed.
The fax memory is full.
Action
Verify that the Photo Bypass Tray is in
the Normal printing position.
(See step d and the Important note in
Loading photo paper uu page 14.)
Do one of the following:
 Refill the paper in the paper tray,
and then press Black Start or
Color Start.
 Remove the paper and load it
again, and then press Black Start
or Color Start. (See Loading
paper and other print media
uu page 10.)
Remove the jammed paper by
following the steps in Printer jam or
paper jam uu page 77.
If this error occurs often during duplex
copy or duplex print, the paper feed
rollers may be stained with ink. Clean
the paper feed rollers.
(uuAdvanced User's Guide: Cleaning
the paper feed rollers)
Clean the paper pick-up rollers.
(uuAdvanced User's Guide: Cleaning
the paper pick-up rollers)
Check the Jam Clear Cover is closed
evenly at both ends. (See Printer jam
or paper jam uu page 77.)
Verify the number and try again.
Set up the Speed Dial number. (See
Storing Speed Dial numbers
uu page 46.)
Do one of the following:
 Clear the data in the memory. To
gain extra memory, you can turn
off Memory Receive.
(uuAdvanced User's Guide:
Turning off Memory Receive
operations)
 Print the faxes that are in the
memory.
(uuAdvanced User's Guide:
Printing a fax from the memory)