Brother DCP-J562DW Online User's Manual page 575

Level 1
Wired LAN
(MFC-J880DW)
WLAN
Wi-Fi Direct
Level 2 Level 3
TCP/IP
IPv6
Ethernet -
Wired Status -
MAC Address -
TCP/IP BOOT Method
IP Address
Subnet Mask
Gateway
Node Name
WINS
Configuration
WINS Server
DNS Server
APIPA
IPv6
WLAN Assistant -
Setup Wizard -
WPS/AOSS -
WPS w/ PIN Code -
WLAN Status Status
Signal
SSID
Comm. Mode
MAC Address -
Push Button -
PIN Code -
Manual -
Group Owner -
Device Device Name
Information
SSID
Descriptions
Turn the IPv6 protocol on or off. To use the
IPv6 protocol, go to the Brother Solutions
Center at http://support.brother.com
information.
Select the Ethernet link mode.
View the current wired status.
View the machine's MAC address.
Select the BOOT method that best suits your
needs.
Enter the IP address.
Enter the Subnet mask.
Enter the Gateway address.
Enter the Node name.
Select the WINS configuration mode.
Specify the IP address of the primary or
secondary WINS server.
Specify the IP address of the primary or
secondary DNS server.
Set the machine to allocate the IP address
from the link-local address range
automatically.
Turn the IPv6 protocol on or off for a wireless
LAN. To use the IPv6 protocol, go to the
Brother Solutions Center at
support.brother.com for more information.
Configure your wireless network settings using
the Brother CD-ROM.
Configure your internal print server manually.
Configure your wireless network settings using
the one-button push method.
Configure your wireless network settings using
WPS with a PIN.
View the current wireless network status.
View the current wireless network signal
strength.
View the current SSID.
View the current Communication Mode.
View the machine's MAC address.
Configure your Wi-Fi Direct network settings
using the one-button push method.
Configure your Wi-Fi Direct network settings
using WPS with a PIN code.
Configure your Wi-Fi Direct network settings
manually.
Set your machine as the Group Owner.
View your machine's device name.
View the Group Owner's SSID.
for more
http://
569