Kipor SINEMASTER IG1000 Operation Manual page 30

Note
:
The required output of the electrical appliance cannot exceed the rated output of parallel
generators.
Shutting off the generators:
1. Turn off the power of electrical appliance then, pull out the receptacle plug.
2. Turn off the two generators.
3. Disconnect the parallel kits from the generators.
The parallel cable connectors can only be used with Kipor parallel ready generators.
•
While connecting the generator and electrical appliance with the parallel output cable, do
•
so carefully and safely insert the plug into the receptacle.
While operating in parallel, the only AC output is through the receptacle on the parallel
•
cable box. Don't use the receptacles on the control panel of either generator.
Don't disconnect the parallel cables during operation.
•
29