Kipor SINEMASTER IG1000 Operation Manual page 18

Hide thumbs Also See for SINEMASTER IG1000:
Table of Contents

Advertisement

■ The total wattage of all appliances connected must be considered.
■ Do not exceed the current limit specified for any one receptacle.
■ Do not connect the generator to a household circuit. This could cause the damage to the
generator or to electrical appliances in the house.
■ Do not modify or use the generator for other purpose than it is intended for. Also observe the
following when using the generator.
■ Do not connect an extension to exhaust pipe.
■ When an extension cable is required, be sure to use a rubber sheathed flexible cable (IEC
245 or equivalent).
■ Limit length of extension cables to 195 ft (60 m) for cables of 1.5mm
cables of 2.5mm
extension cable.
■ Keep the generator away from other electric cables or wires such as commercial power
supply lines.
■ The DC receptacle can be used while the AC power is in use. If you use both at the same time,
be sure not to exceed the total power for AC and DC.
■ Most appliance motors require more than their rated wattage for start-up.
2
. Long extension cables will reduce usable power due to resistance in the
17
2
and 325 feet (100 m) for

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents