Cleaning And Maintenance; Safety Advice; Cleaning - Bartscher 101.926 Instruction Manual

6. Cleaning and maintenance

6.1 Safety advice

o Before beginning with repair or cleaning works make sure the device has been
disconnected from power socket (pull the power plug!!!) and has cooled down.
o Do not use any acid agents and make sure no water ingresses the device.
o To protect yourself from electric shock, never immerse the device, its cables and the
plug in water or other liquids.
CAUTION!
The device is not suited for direct washing via water jets. Therefore, you must not
use any kind of pressure water jet for cleaning the device!

6.2 Cleaning

o Wash the unit thoroughly after each use.
o Wipe the unit's casing with a moist cloth.
o Do not forget to wash the rear of the unit.
o Wash the bowl with a delicate cleaning agent.
o Do not allow debris from dough etc. to remain on the bowl's pins or around its
mount, or it will not be possible to mount the bowl properly.
o Always remove mixing attachments to be washed. Wash the attachment handle and
point of insertion with hot water and a mild washing-up liquid, then rinse and dry
thoroughly.
o Never wash attachments in a dishwasher. Their surfaces may be damaged by the
types of substances used in dishwashers.
o Use soft cloth only and make sure you never use any kind of abrasive agents or
pads, which could scratch the surface.
o After the cleaning procedure you should use a soft and dry cloth to wipe dry and
polish the surface.
o Make sure the device has been cleaned and dried properly for further usage.
- 36 -