Read this instruction manual before using and keep them available at all times! This instruction manual contains information about the installation, operation and maintenance of the device and should be consulted as an important source of information and reference guide. Awareness of the safety instructions and instructions for use in this manual will ensure the safe and correct use of the device.
CAUTION! This symbol highlights dangerous situations which could lead to light injuries, or damage, malfunction, and/or destruction of the device. NOTE! This symbol highlights recommendations and information aimed for effective and trouble-free device operation. 1.2 Safety instructions The device is not intended for use by individuals (including children) with physical or mental disabilities, insufficient experience, and/or insufficient knowledge unless such persons are under the care of a person responsible for their safety or...
Page 5
Only a qualified technician and using original spare parts and accessories should carry out repairs and maintenance of the device. Do not attempt to repair the device yourself. Do not use any accessory or spare parts that have not been recommended by the manufacturer.
Page 6
The supply cable must be disconnected from the socket only by pulling the plug. Never carry or lift the device by the supply cable. In any case do not open the device housing. In case of electrical or mechanical modifications the electric shock hazard will occur.
Page 7
When there are hot ingredients in the mixing beaker, it should be grabbed by the handle, using the protective gloves when required. Hot surface! CAUTION! In order to avoid any damages of the device follow the instructions below. In order to avoid the damages of the motor block, mixing beaker, and the knife system do not move or shake the device during its operation.
1.3 Proper use The operational safety of the device is assured only in case of proper use, according to the operation manual. All technical activities like installation and maintenance must be performed by the qualified service personnel only. Blender is designed only for chopping, mixing, mashing, shaking, mincing of fruits and vegetables.
2. General information 2.1 Liability and Warrantees All the information and instructions in this manual take into account standard safety regulations, current levels of technical engineering as well as the expertise and experience we have developed over the years. The instruction manual was translated with all due care and attention. However, we do not accept liability for any translation errors.
3. Transport, packaging and storage 3.1 Delivery check Please check the delivery upon completeness and transport damage immediately after receipt. In case of visible damage do not accept or accept the delivery with reservation only. Note the extent of damage on the carrier’s bill of delivery. Trigger off the complaint. Hidden damages should be reclaimed immediately after notice, as claims for damages can only be asserted within the effective period for complaints.
4. Technical data 4.1 Overview of parts Knife Lid lock Motor block Lid sensor Control panel Blending tumbler Feet (4) Blending tumbler handle Plunger - 28 -...
Protective devices Protective function That functions allows the motor to be started only with installed mixing beaker lid. That protection consists of magnet in the lid and inductive proximity switch at the pipe next to the mixing beaker. Overload/overheating protection That protection is activated automatically in case of motor overheating due too long operation or overloading.
The surface where the unit is installed must be easily accessible and large. In order to assure comfortable operation and proper air circulation leave at least 15 cm of space on the sides and back and 50 cm on the front and top from the walls, cabinets, etc.
Page 15
WARNING! Risk of burns! Do not process liquids or food products of temperature above 80 °C in the mixing beaker. Before putting the mixing beaker on the motor block make sure that the device is not connected to the socket. CAUTION! In order to protect the device from damages the mixing beaker must be inserted and removed from the motor block only when the device is turned off.
Page 16
After each mixing wait for the device to cool down in order to prevent overheating due to too long operation. When the ingredients are supposed to be mixed shortly, use the PULSE function with the appropriate button. That function makes the motor operating at the maximum speed when the button is pressed.
6. Cleaning WARNING! Before cleaning disconnect the device from the power supply (pull the plug!). Do not use pressurized water jest for cleaning! Protect the device from the water penetration. o Clean the device after each use. o Remove the mixing beaker with the lid from the motor block, empty the beaker when required.
7. Possible Malfunctions In case of malfunction, disconnect the device from its power source. Before contacting the service or sales agent, verify - based on the table below - whether it is possible to eliminate disruption in operation. Problem Cause Solution ...
CAUTION! For the disposal of the device please consider and act according to the national and local rules and regulations. Bartscher GmbH Franz-Kleine-Str. 28 33154 Salzkotten phone: +49 (0) 5258 971-0 Germany...