Cleaning And Maintenance; Safety Advice; Cleaning - Bartscher FP 1000 Manual

6. Cleaning and maintenance

6.1 Safety advice

o Before beginning with repair or cleaning works make sure the device has been
disconnected from power supply and has cooled down.
o Do not use any acid agents and make sure no water ingresses the device.
o To protect yourself from electric shock, never immerse the device, its cables and
the plug in water or other liquids.
CAUTION!
The device is not suited for direct washing via water jets.
Therefore, you must not use any kind of pressure water jet for cleaning the device!

6.2 Cleaning

o Always clean the device after use.
o Disassemble the accessories and other parts used.
o Be very careful when disassembling and cleaning discs and knives as they are very
sharp. Danger of injury!
o For easier cleaning of the bowl with knife, remove it from the base by turning it
counterclockwise.
o Clean individual elements in warm water with a mild cleaning agent, using a soft
cloth, sponge or brush for washing up. Next, rinse in clean water and leave to dry or
dry thoroughly with a cloth. Later, reassemble any accessories as desired.
o All of the device's removable parts are dishwasher-safe.
CAUTION!
Never immerse the motor housing in water or other liquids, nor place under
running water or in the dishwasher.
o Wipe the motor housing and power cable with a soft, moist cloth. Ensure that water
does not get inside the cable or motor housing. Dry the device thoroughly.
o Use only soft cloths for cleaning, never use any aggressive cleaning substances
that could damage the device and its accessories.
o After cleaning, wipe and polish the surface with a dry cloth.
- 34 -