Cleaning And Maintenance; Safety Instructions For Cleaning; Cleaning - Bartscher 101923 Instruction Manual

Cleaning and Maintenance

6 Cleaning and Maintenance
6.1

Safety Instructions for Cleaning

•
Before cleaning, disconnect the appliance from the power supply.
•
Leave the appliance to cool down completely.
•
Make sure water does not enter the appliance. Do not immerse the appliance in
water or other liquids during cleaning. Do not clean the appliance with a
pressurized water jet.
•
Do not use any sharp or pointed, nor metal implements (knife, fork, etc.). Sharp
or pointed implements may damage the appliance, and when in contact with live
parts, they may cause electric shock.
•
For cleaning, do not use any scouring agents that contain solvents nor corrosive
cleaning agents. They may damage the surface.
6.2

Cleaning

ATTENTION!
Washing agents used in dishwashers may damage the surface of the
accessories.
Never wash the mixing elements or the protective cover of the mixing
bowl in a dishwasher.
1. Clean all appliance elements after each use.
2. Rotate the mixing bowl lever counter-clockwise by 180° to lift the mixing bowl
bracket.
3. Always remove the mixing elements for washing by pressing them slightly
towards the holder chuck, rotating clockwise, and then pulling off. Place them in
the mixing bowl.
4. Then lift the mixing bowl to remove it from the bracket, together with the mixing
element.
5. Loosening both fixing screws, remove the protective cover of the mixing bowl
from the body.
6. Remove food residues from disassembled parts.
7. Clean the removed accessories (mixing bowl, mixing elements, mixing bowl
protective cover) thoroughly with hot water and washing-up lye. .
8. Rinse cleaned parts with fresh water and allow to air dry or wipe with a soft, lint-
free cloth.
101923
EN
19 / 20