Table of Contents
Advertisement
6
Cleaning and Maintenance
6.1
Safety Instructions for Cleaning
•
Before cleaning, disconnect the appliance from the power supply.
•
Leave the appliance to cool down completely.
•
Make sure water does not enter the appliance. Do not immerse the appliance in
water or other liquids during cleaning. Do not clean the appliance with a
pressurized water jet.
•
Do not use any sharp or pointed, nor metal implements (knife, fork, etc.). Sharp
or pointed implements may damage the appliance, and when in contact with live
parts, they may cause electric shock.
•
For cleaning, do not use any scouring agents that contain solvents nor corrosive
cleaning agents. They may damage the surface.
6.2
Cleaning
1. Clean all appliance elements after each use.
2. Rotate the opening/closing lever upwards.
EN
3. Raise the motor block upwards.
4. Always remove mixing elements for washing by pressing them slightly towards
the holder chuck, rotating counter-clockwise, and then pulling down.
5. Put mixing elements in the mixing bowl.
6. Next, remove the mixing bowl with mixing elements from the appliance by
rotating it and removing it from fixing catches.
7. Remove food residues from disassembled parts.
8. Clean the mixing bowl and removed accessories thoroughly in hot water with a
gentle washing agent.
NOTE!
Removable parts of the appliance (mixing bowl and mixing elements) are
dishwasher-safe.
9. Rinse cleaned elements in fresh water.
10. Dry parts with a soft, lint-free cloth or allow them to dry in open air.
11. Clean the protective grating and mixing elements holder chuck thoroughly with a
soft, damp cloth.
NOTE!
For cleaning, the protective grate may be removed; to this end, undo fixing
screws.
16 / 18
Cleaning and Maintenance
101915
Advertisement
Table of Contents
