Table of Contents
Advertisement
Technical Specifications
A.2 SMART-AG Specifications
SMART-AG COM/PWR
Serial Com Ports
CAN
Emulated Radar Output
PPS Output
MKI Input
Electrical Conducted/
Coupled disturbance
tolerance
More details can also be found in Section 2.2.2, Status Indicators starting on Page 23
Size
Weight
Operating Temperature
Storage Temperature
Humidity
c
Vibration
a. When tracking GPS satellites.
φ
b.
denotes diameter, here and in the Dimensions graphic on Page 52.
c. See also the Notice section of this manual starting on Page 13.
SMART-AG User Manual Rev 2
INPUT/OUTPUT CONNECTORS
+8 to +36 V DC at 2.5 W (typical while logging)
For the cable pinouts and drawings, see Section A.2.1, SMART-AG
Power/Communications Development kit Cable starting on Page 53
RS-232 F Compliant (Rx and Tx signals only)
SAE J1939/ ISO 11783/ ISO 11898 Compliant
High= Supply Voltage -0.5V Minimum
Low= 0.5V Minimum
Load= 3K Ohm Minimum
3.3 V CMOS Logic Compatible
3.3V CMOS Logic/ 5V Tolerant
INPUT/ OUTPUT CONNECTOR PROTECTION
ISO 7637:2002 (Survives all pulse types)
LED INDICATORS
PHYSICAL
φ
155.3 x 66.8 x
155 mm
495 g maximum
ENVIRONMENTAL
-40°C to +75°C
-55°C to +90°C
Not to exceed 95% non-condensing
Random
MIL-STD-810F Method 514.5 C17
Sinusoidal
IEC 68-2-6 ASAE EP455, 5.15.2 Level 1
Shock
MIL-STD-810 F Method 516.5
a
b
Appendix A
51
Advertisement
Table of Contents
