Table of Contents
Advertisement
Chapter 4
You will need at least 1 MB of available space on your hard drive. For convenience, you may wish to
copy this file to a GPS sub-directory (for example, C:\GPS\LOADER).
The file is available in a compressed format with password protection; Customer Service will provide
you with the required password. After copying the file to your computer, it must be decompressed.
The syntax for decompression is as follows:
Syntax:
where filename is the name of the compressed file (but not including the .EXE extension) and
password is the password required to allow decompression
Example:
A windows-based dialog box is provided for password entry.
The self-extracting archive will then generate the following files:
WinLoad.exe
HowTo.txt
WhatsNew.txt
XXXX.hex
Using the WinLoad Utility
WinLoad is a windows based program used to download firmware to OEMV family cards. The main
screen is shown in Figure 8 on Page 46.
46
[filename] [password]
oem1001 12345678
WinLoad utility program
Instructions on how to use the WinLoad utility
Information on the changes made in the firmware since the last revision
Firmware version upgrade file, where XXXX = program version level (for
example, 1001.hex)
Figure 8: Main Screen of WinLoad
PC Utilities
SMART-AG User Manual Rev 2
Advertisement
Table of Contents
