Using Intercom As The Line For Autodial - Nortel ICS 6.1 Manual

98 / Auto Attendant
For the M7100 or T7100 telephone, an external autodialer can be
programmed only by using a line and not a line pool.
Tip -
number, the call uses your prime line (if you have one).

Using intercom as the line for Autodial

If you press the button with the
autodial number, you must include a valid line pool access code or a
destination code. If line pool access codes or destination codes are
changed, remember to reprogram autodial numbers.
Displays
Compact ICS 6.1 System Coordinator Guide
If you do not include a line selection in an autodial
Continue to enter digits until the number is
complete. Press
incorrect digit. Press
finished.
The memory allotted to autodial numbers in your
Norstar system is full.
While programming external Autodial, you
erased the button by pressing
entering any digits.
Enter the number you want to program (choosing
the line first if necessary) exactly as you would if
you were making a call.
Enter the internal telephone number you want to
program.
You are programming an internal autodial button
and have entered a number that is not an internal
number on your system. Enter a valid internal
number. If the number you are entering is a
destination code, use external autodial.
Press the memory button you want to program.
label as the line for an external
Ã
o r
³
or when you are
³
to erase an
or before
P0603544 02