Line Redirection; Turning On Line Redirection - Nortel ICS 6.1 Manual

Line Redirection

Line Redirection allows you to send your external calls to a telephone
outside the office. You may choose to redirect all your external lines or
only some of them.
Line Redirection takes precedence over the Call Forward feature. If both
features are active on a telephone, incoming external calls on redirected
lines are routed to the specified Selective Line Redirection (SLR) external
destination. Incoming internal calls are forwarded to the specified Call
Forward destination.
You cannot use the Line Redirection feature at either M7100 or T7100
telephones, or a telephone connected to an ATA.

Turning on Line Redirection

² ¡ Ý
1. Press
2. Select the outgoing line to be used for redirected calls.
3. Enter the number to which calls are to be redirected (the ways you can
do this are listed below).
4. Select the lines to be redirected.
Enter the telephone number to which you want to redirect calls by using
one of the following methods.
• Press an external autodial button.
• Enter an external telephone number (using no more than 24 digits)
then press
³
• Press
private network line that does not require you to dial digits.
If you use
all the lines on your telephone light up before pressing
³
press or
redirected.
P0603544 02
.
³
or .
or if the line you have chosen as the outgoing line is a
to redirect all your lines, it is important that you wait until
before all the lines light up, those lines not lit are not
Forwarding your calls / 123
³
or
Compact ICS 6.1 System Coordinator Guide
. If you