Programming The Queue Time-Out; Programming The Overflow Set - Nortel ICS 6.1 Manual

3. Press
4. Press
5. Press
¨
6. Press

Programming the queue time-out

This setting allows you to program the number of seconds a call remains in
the Hunt Group queue before it is routed to the overflow position.
1. At
2. Enter the Hunt Group number you want to program (1-6) or press
3. Press
4. Press
5. Press
¨
6. Press

Programming the overflow set

This setting allows you to program the overflow telephone to which the
Hunt Group calls are to be routed. Unless the overflow position is a Hunt
Group telephone, the call ceases to be a Hunt Group call. If the overflow
telephone is a Hunt Group telephone, the call is treated as a new call and
goes to the bottom of the queue.
The overflow telephone can be a DN number associated with a voice
mailbox.
1. At
2. Enter the Hunt Group number you want to program (1-6) or press
3. Press
4. Press
5. Press
P0603544 02
. The display shows
until the display shows
to set the mode:
to exit or
, press
to scroll through the groups.
. The display shows
until the display shows
to set the queue time-out:
to exit or
, press
to scroll through the groups.
. The display shows
. The display shows
. The display shows
Programming Hunt Groups / 177
.
.
,
to continue programming.
. The display shows
.
to continue programming.
. The display shows
.
.
Compact ICS 6.1 System Coordinator Guide
, .
.
.
.
.
.