Release Button; Hearing Aid Compatibility - Nortel ICS 6.1 Manual

3. Press
4. Enter the DN number of the T7316E which is attached to the eKIM
you want to program, then press
5. Press
6. Press
7. Press
8. Press
9. Press the
buttons.
If no KIM softkeys appear, it means the KIM was not configured as a
CAP in programming.
10. Press
11. Press
to enter a feature code and feature programming. To make the
button blank, press
Monitoring telephones from the CAP
The indicator icons beside the buttons on the CAP show the status of
system telephones or lines that are configured on the CAP. Refer to ''What
line indicators mean'' on page 44 icons.

Release button

¨
Pressing
also ends feature programming.
While you are on a call, do not press
you do, you disconnect the call. Use

Hearing aid compatibility

The handsets on all Norstar and BST telephones are compatible with
hearing aids as defined in the FCC rules, Part 68, section 68.316. Not all
hearing aids are optimized for use with a telephone.
P0603544 02
.
.
two times until
. displays (7316E+<n>KIM).
.
softkey for the KIM for which you want to program
until you find the button you want to program.
to enter an autodial number or Hunt group DN or press
.
ends a call. You do not have to put the handset down.
displays.
.
displays.
displays.
¨
to end a feature you are using. If
²
instead.
Compact ICS 6.1 System Coordinator Guide
Answering calls / 53
displays.
¨