Table of Contents
Advertisement
Installation and connection
Installing the tumble dryer
^ Loosen the 2 screws on the control
panel of the washer-extractor, then
disconnect the plugs from the
electronic unit and from the switch
and carefully place the control panel
to one side where it cannot get
damaged. When disconnecting the
plugs please ensure that the pins do
not come loose or get damaged.
^ Loosen the 4 screws from the joining
panel at the back of the
washer-extractor and then place it to
one side.
72
>
170
^ Then position the tumble dryer in
front of the washer-extractor.
^ Release the cables which protrude
from underneath the dryer from the
packaging.
^ Lift the dryer from the positions
marked in the drawing.
When doing so maintain the correct
distance from the rear panel.
During installation please use
adequate measures to protect
yourself, e.g. by wearing protective
gloves.
,
The dryer is very heavy (approx.
74 kg).
^ With the help of a suitable person lift
the top dryer onto the
washer-extractor.
Use a suitable lifting device if possible.
Hide quick links:
Advertisement
Table of Contents
