Table of Contents
Advertisement
Installation and connection
^ Release the catch and turn the right
hand transit fitting anti-clockwise by
90°.
^ Then withdraw the transit bar.
70
,
To avoid the risk of injury the
holes for the transit bars must be
covered after they have been
removed.
^ Plug the holes with the plastic caps
supplied.
,
The appliance stack must not be
moved without the transit bars in
place.
Keep them in a safe place for future
use. They must be re-fitted if the
stack is to be moved again (e.g.
when moving house).
,
Ensure the stack is stable during
transportion.
Re-fitting the transit bars
Re-fitting is carried out by reversing the
procedure.
Hide quick links:
Advertisement
Table of Contents
