Changing The Lamp - Miele PWT 6089 Vario Operating And Installation Instructions

Changing the lamp

Disconnect the washer-extractor
and tumble dryer from the electricity
supply.
A Open the door of the dryer.
The lighting is at the top of the door
opening on the right-hand side.
B Remove the screw.
C Lower the cover.
D Replace the lamp.
The temperature resistant lamp should
only be ordered from your Miele dealer
or the Miele Spare Parts Department.
,
The lamp specification and
maximum wattage is stated on the
data plate and on the lamp cover.
E Raise the cover again.
F Replace the screw.
Problem solving guide
,
Ensure that it is fitted into
position securely, as any moisture
could cause a short circuit.
63