Miele PWT 6089 Vario Operating And Installation Instructions page 39

Programme duration/Estimated time
remaining
When a programme is selected, the
estimated duration will appear in the
display. Please be aware that it is only
an estimate.
The following factors all affect the
estimated time remaining: residual
moisture content after spinning; type of
fabric; size of load; room temperature;
fluctuations in power supply.
The electronics continually assess
conditions in the dryer and adjust the
estimated time remaining for a more
accurate reading. Because of this, the
time displayed can alter during the
course of a programme.
Before the end of a programme
In many programmes the heating
phase is followed by the cooling down
phase: Cooling down will appear in the
display. The programme is not finished
until the cooling down phase has been
completed.
Do not switch the tumble dryer off
before the drying programme has
finished.
Short drying instructions
E Remove the laundry when the
programme has finished
Anti-crease (if selected) and Finish will
appear in the display to indicate that
the programme has finished.
During the anti-crease phase the drum
will continue to turn at intervals until the
laundry is removed. This helps to
prevent laundry creasing.
It is advisable to remove laundry as
soon as the programme has
finished.
^ Open the door.
39