To Use An Automatic Programme - Miele dgc 6805 Operating And Installation Instructions

To use an Automatic
programme
 Select
Automatic programmes
A list of food types will appear in the
display.
 Select the food category.
The Automatic programmes available
for the food type selected will then
appear.
 Select the Automatic programme that
you want.
Each step you need to take before
starting the Automatic programme will
appear in the display.
In some programmes you will be
prompted on when to add food to the
oven. Follow and confirm these
instructions.
Automatic programmes
Notes on using these programmes
– The degree of doneness and
browning levels are shown in a bar
.
chart with seven segments. The
factory default is always the middle
setting. It will be highlighted. To
change the setting simply move the
highlighting to the left or the right.
– With some roasting programmes you
can also set the moisture level using
Roast with moisture
low temperature over a long period
will be tender and succulent.
– The weight entry in the Automatic
programmes refers to the weight per
piece. For example, you can cook
just one piece of salmon weighing
250 g or 10 pieces of salmon
weighing 250 g at the same time.
– The oven interior needs to be at room
temperature before starting an
Automatic programme.
– When placing food in an already hot
steam oven, be very careful when
opening the door. Hot steam can
escape. Step back from the steam
oven and wait until the steam has
dissipated. When putting cooking
containers or the condensate tray
into the oven or taking them out, take
care not to spill the contents. Avoid
contact with hot steam, and do not
touch the hot oven interior walls.
Danger of burning and scalding.
– Please refer to the cookbook for
information on suitable baking
containers.
– For some Automatic programmes the
start time can be delayed using
or
at
: meat cooked at a
.
Ready at
Start
59