Moisture; Duration; Noises - Miele dgc 6805 Operating And Installation Instructions

Moisture

The  mode and
Combi mode
functions use a combination of oven
heat and moisture. You can alter the
moisture/humidity level within a given
range for an individual cooking
programme or a cooking stage.
Depending on the moisture setting for
the programme, either moisture or fresh
air is injected into the oven. If the
moisture level is set to 0 %, the
maximum amount of air will be injected
and no moisture. If the moisture level is
set to 100 %, air will not be injected
into the oven and the maximum amount
of moisture will be injected.
Some food gives off moisture during
the cooking process. This moisture
from the food also controls the amount
of moisture needed. If the required
amount of moisture is very low and the
food already contains a lot of water the
steam generator may not be activated
at all.
Description of functions

Duration

Depending on the function, you can set
Reheat
a cooking duration of between 1 minute
and 6, 10 or 12 hours.
The duration of the Automatic,
Maintenance and
programmes is set at the factory and
cannot be altered.
With
and programmes that use steam alone,
the set cooking duration does not start
to count down until the set temperature
has been reached. It begins
immediately with all other functions and
programmes.

Noises

You will hear a pumping sound when
the appliance is switched on, during
use and after switching it off. This is the
sound of water being pumped through
the system and is quite normal.
When the steam oven is in use, you will
hear a fan noise.
Menu cooking
 and functions
Steam cooking
27