Sequence of an automatic
programme
Up until the start time the function,
the selected temperature and moisture,
cooking duration (time left),
the start time will appear in the display.
After the start time you can see the
temperature increasing in the display
during the heat-up phase until the set
temperature is reached. Once this
temperature is reached a buzzer will
sound, if this option has been switched
on (see "Settings – Volume – Buzzer
tones").
After the heating-up phase you can
follow the time counting down in the
display. The last minute counts down in
seconds.
At the end of the cooking process the
steam generator and oven
compartment lighting will switch off. A
buzzer will sound if this option has
been switched on (see "Settings –
Volume – Buzzer tones ").
(only with temperatures
Steam reduction
of approx. 80 - 100 °C and 100%
moisture) and
Process finished
appear in the display.
You have the option of saving your
settings as a User programme (see
"User programmes"). Touch to go
to the main menu.
Operation: Combination cooking mode
and
Start at
will
Changing settings during a
programme
Select
.
Change
The following will appear in the display:
– all individual cooking stages
–
Add cooking stages
You can change the specified settings
for a cooking stage or add more
cooking stages to the programme.
Select the cooking stage you want to
change or
Add cooking stages
Change the cooking process as you
wish (see "Advanced operation") and
confirm with OK.
A summary of your settings will appear
in the display.
Check the settings and confirm with
OK or select
Change
settings or to add further cooking
stages.
Cancelling cooking
Touch .
appears in the display.
Cancel cooking?
Select
.
Yes
The main menu will appear. Any
cooking durations set will be deleted.
.
to correct the
47