Set The Correct Boiling Point For Water; Heating Up The Appliance - Miele dgc 6805 Operating And Installation Instructions

Using for the first time
Set the correct boiling point
for water
Before cooking food for the first time,
you must set the boiling point for water,
as this varies depending on the altitude
the appliance is located at. This
procedure also flushes out the
waterways.
This procedure must be carried out
to ensure efficient functioning of your
appliance.
 You should then run the
 programme at 100 °C for
15 minutes. Proceed as described in
"Operation: Steam cooking".
Set the correct boiling point for
water following a house move
If you move house, the appliance will
need to be re-set for the new altitude if
this differs from the old one by 300 m
or more. To do this, descale the
appliance (see "Cleaning and care /
Maintenance / Descaling").
32

Heating up the appliance

 To remove the grease from the ring
There will be a slight smell the first
time the heating element is heated up.
The smell and any vapours will
dissipate after a short time, and do
not indicate a faulty connection or
Steam cooking
appliance.
It is important to ensure that the
kitchen is well ventilated during this
operation.
heating element, heat the appliance
up with nothing in it at 200 °C using
the  function for 30
Fan plus
minutes.
Proceed as described in "Operation:
Functions without steam".