Usage as cold water high-pressure cleaner
Usage as hot water high pressure cleaner
1.
Ignition switch to -OFF- position
Detergent valve must be closed!
(Turn knob to extreme left position „close")
2.
Switch on main switch with disen gaged
spray gun. Vent high-pressure cleaner: Pull
and release trigger of spray gun various
times.
Start cleaning process.
1.
a) Temperature mode: Set desired tem-
perature at the thermostat. (Min. tempe-
rature 40 °C)
b) Percentage mode: Set percentage
value of the heat output
2.
Switch on main switch with disengaged
spray gun. Vent high-pressure cleaner:
Pull and release trigger of spray gun
various times.
Detergent switch must be closed!
(switch in left end position)
3.
Start heating. The water is heated up
and constantly kept at the set
temperature.
Start cleaning process.
19