Table of Contents
Advertisement
General rules
Range of application
This machine may only be used for cleaning facades, vehicles, containers, pavement
slabs, stables, machines and smilar objects.
Inspections
The machine must be inspected according to the "Guidelines for Liquid Spray Devices" at
least once every 12 months by a qualified person, to ensure that continued safe operation
is guaranteed. The results of the inspection are to be recorded in writing. This may be
done in any form. For inspection reports see pages 56 - 57.
High-pressure cleaners used for commercial purposes have to be che-
cked by a qualified person at least every 12 months!
Accident prevention
The machine is designed for accidents to be impossible (if used according to these
instructions). Please read safety notes included in this manual carefully before using the
machine and act correspondingly. Operating staff has to be instructed according to this
manual. The "Guidelines for Liquid Spray Devices" must be complied with.
Setting up - Location
Neither set up and operate the machine in rooms where there is a risk
of fire or explosion nor put it into puddles. Do not use the machine
under water.
During the combustion process air is needed and exhaust gas
emerges. If the machine is operated in a confined space, precautions
have to be taken to safely exhaust the fumes. Furthermore a sufficient
ventilation has to be provided for.
Never shut the exhaust gas outlet on top of the machine. Never stoop
over this aperture and never reach into it. Emerging gases are extre-
mely hot!
Safety notes
Do not jam the trigger of the gun during operation!
When carrying through service and maitenance tasks the machine has to
be cut off the power supply system. Put main switch to „0" and pull plug
out of socket.
Never operate the machine if cables or other safety-relevant parts (e.g.
excess pressure valve, high-pressure hose, spraying devices, etc.) are
defective.
7
Advertisement
Table of Contents
