Usage As A Cold Water High Pressure Cleaner; Usage As A Hot Water High Pressure Cleanerr - Kranzle therm 601 E-ST 18 Operating Manual

Usage as a cold water high-pressure cleaner
Usage as a hot water high pressure cleaner
1.
Ignition switch to -OFF- position
Detergent valve must be closed!
(Switch in left end stop position)
2.
Switch on main switch with disengaged
spray gun. Vent high-pressure cleaner: Pull
and release trigger of spray gun various
times.
Start cleaning task.
1.
a) Temperature mode: Set required tem-
perature at the thermostat.
(Min. temperature 40 °C)
b) Percentage mode: Set percentage
value for heating output.
2.
Switch on main switch with disengaged
spray gun. Vent high-pressure cleaner:
Pull and release trigger of spray gun
various times.
Detergent valve must be closed!
(Switch in left end stop position)
3.
Start ignition. The water is heated up
and constantly kept at the set
temperature.
Start cleaning task.
13