Table of Contents
Advertisement
8
Safety notes
Never operate the machine without supervision. The machine may only
be operated by persons who have been instructed accordingly.
Some parts inside the machine, all water conducting components and all
metal parts of gun and lance are hot during hot water operation. Keep all
hoods and protective covers closed during operation and never touch
any metal parts of gun or lance.
Persons operating the machine should wear the necessary protective
clothing, i.e. waterproof clothing, rubber boots, safety goggles, headwear
etc. It is prohibited to use the machine in close vicinity to people lacking
suitable protective clothing.
The high-pressure jet can generate a high level of noise. If noise exceeds
the maximum allowed levels, users and others in the vicinity must wear
suitable ear protection.
Do not spray against matter containing asbestos or other hazardous sub-
stances.
For safety reasons always switch the main switch to „0"- postion after
having finished the cleaning task (disconnection from power supply).
Bear in mind that during cleaning tasks
with a high-pressure water jet a significant
recoil at the lance arises.
Additionally angled lances produce a
clearly perceivable amount of torque.
Apply the safety catch on the spray gun
after each use, in order to prevent
unintentional spraying!
Always aim the underbody lance!
Bear in mind when using a curved or angled
spraying lance that there is a significant
amount of torque in the recoil!
Advertisement
Table of Contents
