Table of Contents
Advertisement
High-pressure hose and spraying device
The high-pressure hose and spraying device supplied with the machine are made of high
grade material, they are also optimized for the machine and marked as required by the
appropriate regulations.
If replacement parts are required, only such parts that are authorized
by the manufacturer and which bear the markings required by the
appropriate regulations may be used.
The high pressure hose and spraying device must be connected in a
pressure-tight manner.
The high-pressure hose may not be driven over, pulled excessively, or twi-
sted. The hose may under no circumstances be pulled over sharp edges,
since otherwise the guarantee is automatically void.
Hoses are wearing parts. The guarantee only covers defects of fabrica-
tion no external damages whatsoever.
Defective high-pressure hoses and spraying devices may not be
repaired. They always have to be replaced.
Pressure control valve-safety valve
The pressure control valve allows full adjustment of the quantity and pressure of the
water. The safety valve protects the machine from excessive pressure and cannot be
adjusted beyond the admissible operating pressure. The setting nuts are sealed with
lacquer.
Replacements, repairs, new adjustments and sealing operations may
only be performed by trained personnel.
Setting for pressure, quantity and temperature
The pressure control valve on the pump
head is used to control the operating
pressure plus the water flow and conse-
quently the water temperature as well.
Turn right to increase the pressure,
turn left to reduce the pressure.
13
Advertisement
Table of Contents
