System Status - Humminbird HELIX 5 SERIES Operation Manual

System Status

Use System Status to view system connections and to conduct a unit self-test.
After you select System Status from the Start-Up Options Menu, press the VIEW key to display
the following options:
• Self Test
• Accessory Test
• GPS Diagnostic View
To exit System Status, power off your control head.
Self Test displays results from the internal diagnostic self test, including unit serial number,
Printed Circuit Board (PCB) serial number, software version, total hours of operation, and the
input voltage.
Accessory Test lists the accessories connected to the system.
NOTE: The speed accessory will be detected only if the paddlewheel has moved since your control head
was powered up.
Self Test Screen
Accessory Test Screen
73
Start-Up Options Menu