Humminbird HELIX 5 SERIES Operation Manual page 51

Recording and Playback
The Recording feature records active sonar information. When the recording is played back, the
views that were active during the recording are available in Playback. The Recording and
Playback feature is available when an optional-purchase microSD card is installed and Screen
Snapshot is On (see Setup Menu Tab: Screen Snapshot). Saved Recordings can be played back
from the Snapshot and Recording View.
NOTE: The recording feature is only available in Humminbird models with sonar. The recording feature
is not available in the HELIX GPS model.
1 From Snapshot and Recording View,
select Start Recording from the X-Press Menu
2
Slider Bar
Notes about Recording:
• While recording, press the EXIT key to exit the Snapshot and Recording X-Press Menu and
scroll to a different view. Recording will continue.
• The slider bar at the bottom of the Snapshot and Recording View shows the recording
progress and remaining space on the microSD card.
• Pings Per Second: For maximum performance, keep the Pings Per Second setting on
Auto (see Snapshot and Recording X-Press Menu).
• Viewing saved Screen Snapshots and Recording Playback are not available while in
recording mode.
Start recording:
1
1. From the Snapshot and Recording View,
2. Highlight Start Recording, and press the
2
Stop recording:
1. In any view, press the MENU key once to
2. Highlight Stop Recording and press the
45
press the MENU key once to open the
Snapshot and Recording X-Press Menu.
RIGHT Cursor key. A waypoint will also be
created at the boat location, and the
recording shares the same file name (.SON).
open the Snapshot and Recording X-Press
Menu.
RIGHT Cursor key.
Snapshot and Recording View