Simulator; System Status - Humminbird 363 Operation Manual

Simulator

NOTE: To get the full benefit of the Simulator, it is important to select Simulator manually
from the Start-Up Options menu as opposed to letting the 300 Series
Simulator automatically (as it will if a transducer is not connected and you do nothing during
power up). Manually selecting Simulator from the Start-Up Options menu allows you to pre-
configure your 300 Series
make will be saved for later use.
A message will appear on the display periodically to remind you that you are using the
Simulator.
Exit the Simulator by powering your 300 Series

System Status

Use System Status to view system connections and to conduct a unit self-test.
The following screens are displayed in turn when you press the VIEW button when using
System Status:
• Self Test
• Accessory Test
• GPS Diagnostic View.
Exit System Status by powering your Fishing System off.
www.Busse-Yachtshop.de
Simulator
Use the Simulator to learn how to use your 300
Series TM
the water. The Simulator is a very powerful tool that
simulates on the water operation, providing a
randomly-updated display. We recommend going
through this manual while using the Simulator, since
all of the menus function and affect the display the
way they actually do when in Normal operation.
TM Fishing System for on the water operation. Any menu changes you
31
Fishing System before taking your boat on
TM Fishing System off.
email: info@busse-yachtshop.de
TM Fishing System enter