Shaded Depth; Chart Detail Level - Humminbird HELIX 5 SERIES Operation Manual

Hide thumbs Also See for HELIX 5 SERIES:
Table of Contents

Advertisement

Set Map Offset allows you to change the map offset used by your control head. Press the
4-WAY Cursor Control key to activate the cursor and move it to the location where the Map Offset
will be applied. Then, confirm the map offset position using the Set Map Offset menu setting.
The Map Offset will be applied to all maps and not just the map that requires the correction. The Map
Offset should be cleared if a different map is to be used.
NOTE: The cursor must be active in order for this procedure to work. If the cursor was not active before
you began this procedure, an error message will appear. Exit the menu, set the cursor, then try again.
NOTE: This feature does not apply to LakeMaster charts.
Clear Map Offset allows you to clear the Map Offset. The Clear Map Offset menu option is
available when Map Offset is active.
Shaded Depth allows you to change the depth used for shading on the Chart Views.
Chart Detail Level allows you to select how much chart detail you want displayed on the
Navigation Views.
NOTE: Some chart details are only available with an optional-purchase microSD card.
Basic shows land areas, ports, obstructions, and restricted areas.
Navigation shows navaids, landmarks, ferryways, and navigation routes in addition to
the Basic information.
Underwater shows depth contours, fishing areas, underwater wrecks, tides and currents
in addition to the Basic and Navigation information.
All shows roads, buildings, railways, and other notations in addition to the Basic,
Navigation, and Underwater information.
Custom (Advanced user mode) allows you to display or hide chart layers on the
Navigation Views. The available chart layers include Navigable Canals, Boundaries,
Restricted Areas, Coastline, Bridges, etc.
Set Map Offset
(Advanced)
Settings: Press the RIGHT Cursor key and follow screen instructions to
activate.
Clear Map Offset
(Advanced)
Settings: Follow screen instructions to activate.

Shaded Depth

Settings: Off, 1 to 180 feet, or 1 to 60 meters [International Units only];
Default = 15 ft, 5 m

Chart Detail Level

Settings: Basic, Navigation, Underwater, All, Custom; Default = All
127
Chart Menu Tab

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HELIX 5 SERIES and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents

Save PDF