Drift Alarm; Alarm Tone - Humminbird HELIX 5 SERIES Operation Manual

Drift Alarm allows you to set the size of a perimeter around the boat's anchored position. If the
anchored boat drifts outside of that perimeter, the Drift Alarm will sound.
Alarm Tone selects the pitch of the alarm sound. A brief tone will be produced as you adjust the
Alarm Tone so that you can select the tone that you can hear best.
Timer Setup allows you to open a dialog box to create settings for the Timer. You can also start
the countdown from this dialog box. When the Timer is started, the clock counts down from the
amount of time set in the dialog box.
• Time: Use the 4-WAY Cursor Control key to set the hours, minutes, and seconds.
• Save and Start: To start the Timer immediately, select Save and Start, and press the RIGHT
Cursor key.
• Save and Close: To save your settings and start the Timer at a later time, select Save and
Close, and press the RIGHT Cursor key. Also, see Start Timer.
• Digital Readout: To display the Timer on-screen as it counts down, see Views: Change
the Digital Readouts.
Alarms Menu Tab

Drift Alarm

Settings: Off, 25 to 3000 feet, 10 to 1000 meters [International Models
only]; Default = Off

Alarm Tone

Settings: High, Medium, Low; Default = Medium
Timer Setup
Settings: Press the RIGHT Cursor key to open the dialog box.
106
Drift Alarm Circle