Triplog Reset resets the Triplog to zero, and will appear in the menu if a Temp/Speed Accessory
is connected and the paddlewheel has moved at least once, or if a GPS Receiver is installed. The
Triplog provides the following information: timer for elapsed time, distance traveled since last
reset, and average speed.
NOTE: See Views to find out how to display Triplog information on the screen.
Use this menu choice with caution!
Restore Defaults resets ALL menu settings to their factory defaults.
Use this menu choice with caution!
Format Nav Directories deletes ALL navigation data (waypoints, routes, tracks, and groups) and
resets the navigation data directory in the Waypoint Management dialog box. You may need to
reset the navigation directory if you've imported corrupted navigation data from an unknown
source, which can cause the unit to malfunction (see microSD Card Slot: Import Navigation
Data). Contact Humminbird Customer Service before using this menu option.
NOTE: It is important to back up your control head's data files periodically. Data files should also be saved
to your PC before restoring the unit's defaults or updating the software. See your Humminbird online account
at humminbird.com and the Waypoint Management guide.
Setup Menu Tab
Triplog Reset
(with Speed input only)
Settings: Press the RIGHT Cursor key and follow screen instructions to
activate.
Restore Defaults
Settings: Press the RIGHT Cursor key and follow screen instructions to
activate.
Format Nav Directories
Settings: Press the RIGHT Cursor key and follow screen instructions.
134