Table of Contents
Advertisement
531476-1_A - 787c2_Eng.qxd
11/22/2005
Drift Alarm
Drift Alarm sounds when the boat has exceeded the
distance from the boat's anchored position, based on the menu setting. Drift Alarm
allows you to set the size of a perimeter around the boat's anchored position; if the
anchored boat drifts outside of that perimeter, the Drift Alarm will sound.
Drift Alarm Perimeter
To change the Drift Alarm setting:
1. Highlight Drift Alarm on the Alarms main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Drift Alarm
setting. (Off, 25 to 3000 feet, 10 to 1000 meters [International Models only],
Default = Off)
Alarm Tone
Alarm Tone selects the pitch of the alarm sound. A brief
tone will be produced as you adjust the Alarm Tone so that you can select the tone that
you can hear best.
To change the Alarm Tone setting:
1. Highlight Alarm Tone on the Alarms main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Alarm Tone
setting. (High, Medium, Low, Default = Medium)
3:22 AM
Page 98
Drift Alarm Circle
91
Setup Menu Tab
From any view, press the MENU key twice to access the
tabbed Main Menu System, then press the RIGHT cursor
key until the Setup tab is selected.
NOTE: Menu choices will vary depending on system settings
such as whether the unit is set for Advanced User mode and
what accessories are attached to the unit.
Setup Menu Tab
92
Advertisement
Table of Contents
