Can-Am DS 250 Operator's Manual page 62

CONTROLS/INSTRUMENTS/EQUIPMENT
vmo2006-014-011_b
TYPICAL - ENGINE STOP SWITCH
FUNCTIONS
1. Engine stop switch
2. RUN position
3. OFF position
Engine Start Button
To start engine, place the engine stop
switch to RUN position.
Press and hold the engine start button,
release immediately after engine is
started.
vmo2006-014-011_e
TYPICAL
1. Engine start button
2. Engine stop switch
NOTE: The engine will not turn if the
engine stop switch is turned to OFF
position.
______________
60
Override Button
This button is used to override the
reverse speed limiter system while
power backing up. Press and hold the
override button then depress throttle
lever gradually.
WARNING
Never activate the override but-
ton if throttle lever is already de-
pressed as loss of control may re-
sult, causing severe personal in-
jury or death.
vmo2006-014-055_b
TYPICAL
1. Override button
Choke Lever
This device features a variable lever to
ease engine cold start.
Position OFF is for normal use with a
warm engine.