Hydraulic Brakes (Ds 90 X) - Can-Am DS 90 Operator's Manual

MAINTENANCE PROCEDURES
vmr2008-106-011_a
1. Cable link
2. Cable support
Using adjustment screws on lever, ad-
just cable free-play.
BRAKE CABLE ADJUSTMENT
Free-play
vmr2008-106-012_a
A. 10 mm to 12 mm (.4 in to .5 in)
Tighten all adjustment screw locks.
Rear Brake Lever Adjustment
The normal free-play of
end of brake lever is between
15 mm to 25 mm (.6 in to 1 in).
vmo2008-008-050_a
NORMAL FREE-PLAY
A. 15 mm to 25 mm (.6 in to 1 in)
______________
96
10 mm to 12 mm
(.4 in to .5 in)
at the
To adjust rear brake lever, turn the
brake cable adjuster at the end of brake
cable until proper adjustment is ob-
tained.
vmo2008-008-049_a
1. Brake cable adjuster

Hydraulic Brakes (DS 90 X)

Hydraulic Brake Inspection
WARNING
The brake fluid replacement or
brake system maintenance and
repairs should be performed by an
authorized Can-Am dealer.
The braking system is an hydraulic type
and no adjustment is required.
Check the following to keep the brakes
in a good operating condition:
– Brake fluid level
– Brake system for fluid leaks
– Brake for spongy feel
– Brake cleanliness
– Brake discs for excessive wear and
surface condition
– Brake pads for wear, damage or
looseness.
Have your authorized Can-Am dealer
inspect brake pads for wear or dam-
age.