Can-Am DS 90 Operator's Manual page 61

vmo2009-004-005_b
1. Engine stop switch
2. OFF position
3. ON position
Engine Start Button
To start engine, place the engine stop
switch to ON position.
Press and hold LH brake lever.
Press and hold the engine start button.
Release immediately after engine is
started.
vmo2009-004-005_c
1. Engine start button
To stop engine, fully release throttle
lever then use the engine stop switch.
CONTROLS/INSTRUMENTS/EQUIPMENT
Choke Lever
This device features a variable lever to
ease engine cold start.
Position OFF is for normal use with a
warm engine.
vmo2009-004-005_d
OFF POSITION
The full choke position is used for
lower engine temperature.
vmo2009-004-006_a
FULL CHOKE POSITION
The other positions between OFF and
FULL position, will be use depending
on the engine temperature.
_______________
59