Can-Am DS 90 Operator's Manual page 94

MAINTENANCE PROCEDURES
vmo2008-008-048_a
1. Drive chain roller
Sprockets
Check the sprocket axle and pinion for
distortion. Replace if necessary.
1. Good
2. Replace
Drive Chain Cleaning and
Lubrication
Clean chain by soaking and agitating in
solvent.
Wipe it dry.
Lubricate using commercial chain lubri-
MAINTENANCE SCHED-
cant, refer to
ULE
for more details.
______________
92
Drive Chain Adjustment
NOTICE
Never adjust the drive
chain with the driver seated on the
vehicle. Remove all load on the ve-
hicle.
Select a level surface and set transmis-
sion to NEUTRAL.
Check drive chain condition.
The drive chain should be checked,
lubricated and adjusted before every
ride.
To adjust chain, loosen rear axle locking
bolts.
vmo2008-008-046_a
TYPICAL — REAR AXLE
1. Locking bolts
Loosen chain adjuster lock nut.
On so equipped models, push and hold
chain tensionner to release chain ten-
sion.
Turn chain adjuster nut until proper ad-
justment is obtained.