Table of Contents
Advertisement
Available languages
Available languages
INSTALLATION
a) in case of a strong local aerial signal (striped picture) attenuate the
b) individually adjust and store the volume level of each channel
c) in case of a strong sound signal (distorted sound), attenuate the
d) use the manual fine tuning to obtain a better picture reception, if
1
2
3
4
5
a) RF attenuator (ATT)
b) Volume offset (VOL)
c) IN-AMP (input amplifier)
To reactivate AFT
d) AFT
(Automatic Fine
Tuning)
Repeat from the
beginnig and select "ON"
in step 5.
6
Using "Further Programme
Preset"
Using the menu "further Programme Preset" you can
signal individually for each programme position (RF attenuator).
(Volume offset).
sound signal for each programme position.
the picture is distorted. Normally the AFT (automatic fine tuning) is
operating.
Press MENU to display the main menu.
for "Preset" with >+ or ?– and press OK.
Select the symbol
The PRESET menu appears.
Select "Installation" with >+ or ?– and press OK. The
INSTALLATION menu appears.
Select "Further Programme Preset" with >+ or ?– and press OK.
The FURTHER PROGRAMME PRESET menu appears (See Fig.
17).
Using >+ or ?– select the desired programme position and press
OK once to select a) "ATT" (RF Attenuator), twice to select b)
"VOL" (Volume offset), three times to select c) "IN-AMP" (Input
Amplifier) or four times to select d) AFT (Automatic Fine Tuning).
The selected item changes colour.
To adjust or change:
Using >+ or ?– select "On" for the selected programme position.
Press OK to confirm the selection. Repeat step 5 to attenuate
other programme positions.
Using >+ or ?– you can adjust the volume level for the selected
programme position within a range form –7 to +7.
Press OK to store the volume level.
Repeat step 5 to set the volume level for other programme
positions.
Using >+ or ?– select "Off" for the selected programme position.
Press OK to confirm the selection. Repeat step 5 to switch off the
input amplifier for other programme positions.
Using >+ or ?– you can fine-tune the channel within a range from
–15 to +15. Press OK to store the fine-tuned level. Repeat step 5
to fine-tune the other channels.
Press MENU to return to the normal TV mode.
FURTHER PROGRAMME PRESET
PROG
ATT
VOL
IN-AMP
AFT
1
off
0
on
on
2
off
0
on
on
3
off
- 1
on
- 1
4
off
- 1
on
- 1
5
off
0
on
on
6
off
- 1
on
- 1
7
off
- 1
on
- 1
8
off
- 1
on
- 1
9
off
- 1
on
- 1
10
off
- 1
on
- 1
Select
and press OK
Fig. 17
11
GB
Advertisement
Chapters
Table of Contents
