Skipping Programme Positions; Captioning A Station Name - Sony KL-37W1K Operating Instructions Manual

MANUAL
PROGRAMME
PRESET
If you have made a
mistake
Press ≅ to go back to
the previous position.
To go back to main
menu
Keep pressing ≅.
To go back to the
normal TV picture
Press MENU.
MANUAL
PROGRAMME
PRESET
12

Skipping Programme Positions

You can skip unused programme positions when selecting
programmes with PROGR +/– buttons. However, the skipped
programmes may still be called up when you use the number
buttons.
1 Press MENU to display the main menu.
for "Preset" with >+ or ?– and press OK.
2 Select the symbol
The PRESET menu appears.
Select "Manual Programme Preset" with >+ or ?– and press OK.
3
The MANUAL PROGRAMME PRESET menu appears. (See Fig.
18.)
Using >+ or ?–, select the programme position which you want to
4
skip and press OK.
The "SYS" position changes colour.
Press >+ or ?– until "– – –" appears in the SYSTEM position.
5
(See Fig. 19.)
6 Press OK. (See Fig. 20.)
When you select programmes using the PROGR +/– buttons, the
programme position will be skipped.
7 Repeat steps 4 to 6 to skip other programme positions.

Captioning a Station Name

Programme names are usually automatically taken from Teletext if
available, You can also "name" a channel or an input video source
using up to five characters (letters or numbers) to be displayed on
the TV screen (e.g. BBC1). Using this function, you can easily
identify which channel or video source you are watching.
1 Press MENU to display the main menu.
for "Preset" with >+ or ?– and press OK.
2 Select the symbol
The PRESET menu appears.
Select "Manual Programme Preset" with >+ or ?– and press OK.
3
The MANUAL PROGRAMME PRESET menu appears. (See Fig.
21.)
Using >+ or ?–, select the programme position you want to
4
caption and press OK repeatedly until the first element of the
LABEL position is highlighted.
Select a letter or number with >+ or ?– and press OK.
5
The next element will be highlighted.
Select other characters in the same way. If you want to leave an
element blank, select - and press OK. (See Fig. 22.)
6 After selecting all the characters, press OK repeatedly until the
cursor appears by the next programme position (at the left margin).
Now the caption you chose is stored. (See Fig. 23.)
7 Repeat steps 5 and 6 to caption names for other channels.
PROGR
+
_
MANUAL PROGRAMME PRESET
PROG SYS CH SEARCH LABEL
1 B/G C21 off - - - - -
2 B/G C24 off - - - - -
3 B/G C25 off - - - - -
4 B/G C27 off - - - - -
5 B/G C28 off - - - - -
6 B/G C22 off - - - - -
7 B/G C26 off - - - - -
8 B/G C25 off - - - - -
9 B/G C23 off - - - - -
10 B/G C29 off - - - - -
Select and press OK
Fig. 18
3 – – –
Fig. 19
3 – – –
4 B/G
Fig. 20
MANUAL PROGRAMME PRESET
PROG SYS CH SEARCH LABEL
1 B/G C21 off - - - - -
2 B/G C24 off - - - - -
3 B/G C25 off - - - - -
4 B/G C27 off - - - - -
5 B/G C28 off - - - - -
6 B/G C22 off - - - - -
7 B/G C26 off - - - - -
8 B/G C25 off - - - - -
9 B/G C23 off - - - - -
10 B/G C29 off - - - - -
Select and press OK
Fig. 21
2 B/G C 2 5 off S– – – –
Fig. 22
2 B/G C 2 5 off SONY
Fig. 23