Table of Contents
Advertisement
Menu System
Using the "Further Programme Preset" function
With this feature you can:
a) Individually attenuate the strength of a channel signal in case there is a strong local aerial signal (characteristically a striped
picture).
b) Individually adjust the volume level of each channel.
c) Normally the automatic fine tuning (AFT) will operating, however you can manually fine-tune the TV to obtain better
reception if the picture is distorted.
d) Preset the AV output for the programme positions of channels with scrambled signals (eg from a pay TV decoder). In this way
a connected VCR records the unscrambled signal.
1
2
3
4
5
6
7
20
Menu System
Press the
button on the remote control to display the menu
on the screen.
Push the joystick
to select the
Set Up menu.
Push the joystick
or
to select Manual Set Up then push to
to enter.
Push the joystick
or
to select Further Programme Preset,
then push to
to enter.
Push the joystick
or
to select the relevant programme number,
then push
repeatedly to select:
a) ATT (RF attenuator)
b) VOL (Volume Offset)
c) AFT (Automatic Fine Tuning) or
d) DECODER
a) ATT
Push the joystick
to select On, then press the
Repeat steps 5 and 6 a) to attenuate other channels.
b) VOL
Push the joystick
or
to adjust the volume level of the channel
over a range of -7 to +7, then press the
and 6b) to adjust the volume level of the other channels.
c) AFT
Push the joystick
or
to fine tune the channel frequency over
a range of -15 to +15, then press the
6c) if you wish to fine tune other channels.
d) DECODER
Push the joystick
or
to select AV1 (for a decoder connected
to the Scart :1/
1) or AV3 (for a decoder connected to the
Scart :3/q 3 (SMARTLINK)), then press the
Repeat steps 5 and 6d) to select the AV1 or AV3 output for other
programme positions.
The picture from the decoder connected to the Scart connector
:1/
1 or :3/q 3 (SMARTLINK) on the back of the
set will appear on the selected programme number.
Press the
button to exit and return to the normal TV screen.
The TV set is now ready for use.
symbol, then push
to enter the
button.
button. Repeat steps 5
button. Repeat steps 5 and
button.
Advertisement
Table of Contents
