Graphic Equalizer; Using The Sleep Timer - Sony KL-37W1K Operating Instructions Manual

Note: The modifications
1
made in "USER" mode
will be stored. All other
settings are reset to
factory-set level when
2
you change to another
mode.
3
4
TIMER
To switch off the timer
Select "OFF" in step 3.
To check the
1
remaining time
Press ∃.
2
To go back to the
normal TV picture
Press MENU. 3
4

Graphic Equalizer

Using this function you can individually adjust the sound by cutting
and boosting selected frequencies. You can also select between
the following modes:
Flat n Pop n Rock n Jazz n Vocal n User
Select "Sound Control" in the main menu, then select "Graphic
Equalizer" using >+ or ?– and press OK.
The GRAPHIC EQUALIZER menu appears (See Fig. 32).
Press OK. The colour of "Mode" changes. Select the desired
mode with >+ or ?– and press OK.
If you want to modify a mode, select the desired bar of a frequency
band using >+ or ?– and press OK. The selected frequency
changes colour. Using >+ or ?– adjust the level of frequency and
press OK. In this way you can adjust all 5 graphic bars.
Press MENU to return to the normal TV mode.

Using the Sleep Timer

You can select a time period after which the TV automatically
switches into standby mode.
Using >+ or ?– select the symbol t for "Timer" and press OK.
The TIMER menu appears (see Fig. 33).
Press OK.
The time period option changes colour.
Select the time period with >+ or ?–.
The time period (in minutes) changes as follows:
10 n 20 n 30 n 40 n 50 n 60 n 70 n 80 n 90
↑
After selecting the time period, press OK.
The cursor moves back to the left margin and the timer starts
counting.
One minute before the TV switches into standby mode, a message
is displayed on the screen.
GRAPHIC EQUALIZER
Mode: [User]
+
0
–
100 400 1K 4K 10K
Select and press OK
Fig. 32
Flat
Pop
Rock
Jazz
Vocal
User
TIMER
Sleep Timer [ 10 Min ]
Select and press OK
Fib. 33
17
GB