Train/No Train Indicator; Pfa - M.T.H. Premier Bavarian Class 3/6 Express Operator's Manual

Manual Volume Control
To adjust the volume of all sounds
made by this engine, turn the
master volume control knob
located under the left water hatch
on the tender deck clockwise to
increase the volume and counter-
clockwise to decrease the volume.
®
Proto-Sound 3.0 features are activated by sequences of Bell and Horn button pushes
described below. Please read the full descriptions of each feature before using it. To use
these buttons to activate features rather than to blow the horn or ring the bell, you
should tap the buttons very quickly with a ½-second pause between button presses.
You may need to practice your timing to make this work smoothly.
Press
Horn
Short &
Firm
Feature to Be Activated

Train/No Train Indicator*

PFA (Passenger/Freight Announcements)
Fire the Rear Coupler
Fire the Front Coupler
Speed Control On/Off
Lock into a Direction
Train Operation/Alternate Lighting*
Reset to Factory Defaults
*Only applicable to engines equipped with train indicator and operation lighting
Train/No Train Indicator
By default your engine will be set to a No-Train indication. That means your engine has
no string of cars being pulled. Your engine lighting will look like this:
Forward (Boiler)
To set your engine's lights to indicate that it is pulling a string of cars behind it, you
want to tap the Bell button followed by one tap of the Horn/Whistle button.
Premier Bavarian Class 3/6 Express Steam Locomotive
Figure 12: Manually Adjusting the Volume
Timing Chart
½ Sec. Press
Pause
Short &
Total Time Lapse: 1
Forward (Tender)
red
12
½ Sec.
Bell Pause
Firm
½
Seconds
Button Code:
1 Bell, 1 Horn/Whistles
1 Bell, 2 Horn/Whistles
1 Bell, 3 Horn/Whistles
1 Bell, 4 Horn/Whistles
1 Horn/Whistle, 2 Bells (from Neutral only)
1 Horn/Whistle, 3 Bells
1 Horn/Whistle, 4 Bells
1 Horn/Whistle, 5 Bells (from Neutral only)
Reverse (Boiler)
Train/No Train
Indicator
Proto-Sound 3.0
Volume Adjustment
Knob
Press
Bell
Short &
Firm
Reverse (Tender)
red
®